Product Description

Durable TiN Coating Cuts Chamfers In Toughest Metal

High-speed steel chamfer cutter makes perfect 45° angle cuts for easier cylinder filling with speed loaders. TiN coating on the cutting surface allows for smooth, chatter-free cuts and longer cutting life even on tough metals such as scandium. Also great for chamfering the muzzle on chrome-lined barrels. Available in 5/8" size.

SPECS: High-speed steel, TiN coating on cutting surface. Overall length: 2.4" (61mm). Fits Brownells Muzzle and Cylinder Facing and Chamfering Tool Handle and Pilots.

Product Description

Match-Grade Barrel Blanks From U.S.'s Oldest Barrel Maker

Famous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved.

SPECS: 4140 Chrome moly and stainless steel. "Finished" dimensions are shown in chart. Unturned Blanks will be .025" (.63mm)-.050" (1.3mm) larger in diameter and 1-½" (3.8cm) longer than shown. Not threaded or chambered. ORDERING: Advise: 1) Complete 9-digit Stock # from chart; 2) Caliber 3) Twist 4) Contour. If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full payment in Advance and are non-cancelable and non-refundable. Not shipped prepaid.

Product Description

Match-Grad Barrel Blanks From U.S.'s Oldest Barrel Maker

Famous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved.

SPECS: 4140 Chrome moly and stainless steel. "Finished" dimensions are shown in chart. Unturned Blanks will be .025" (.63mm)-.050" (1.3mm) larger in diameter and 1-½" (3.8cm) longer than shown. Not threaded or chambered. ORDERING: Advise: 1) Complete 9-digit Stock # from chart; 2) Caliber 3) Twist 4) Contour. If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full payment in Advance and are non-cancelable and non-refundable. Not shipped prepaid.

Product Description

Polish Chamfers; Lap Sharp Edges; Improve Accuracy

Use to polish after using 45° Chamfer Cutters; or for lapping out dings, sharp edges, etc., by itself. Improves accuracy. Use with abrasive paste - like our Silicon Carbide grits - mounted in variable speed electric drill. Made of half-hard brass to hold polishing grit well without excessive tool wear.

Product Description

Our Chamber Reamers are individually hand-stoned to cut smooth and chatter free. Made to SAAMI specifications or custom specifications for standardized cartridges and to the current industry standard for popular wildcat cartridges. All HSS reamers have a 3/8" square drive shank. Carbide reamers feature a .4375" cylindrical shank. We can grind a square drive on a carbide reamer, but we do not recommend driving a carbide reamer with square drive - the carbide tends to chip and/or shatter. Premium reamers feature removable pilots that are held in place with a screw. Premium reamers include one bushing of nominal bore diameter.

Product Description

The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.

Product Description

Fits 110 Long Action & New 10 Short Action

Provides the correct wrench for all styles of Savage barrel nuts. Double-end wrench helps prevent expensive damage; fits older Savage barrel nuts with round bottom notches and short action guns with square bottom notches.

SPECS: Stainless steel. 12" (30.5cm) long. .186" (4.7mm) thick.