22 Cal 12-Flute Muzzle Chamfer Set Brownells

Product Description

Smooth, Chatter-Free Cutter & Interchangeable Brass Pilots

A ready-to-use combination of twelve-flute cutter and brass pilot for touching up those minor rifle muzzle imperfections that can destroy fine accuracy. Twelve flutes cut smooth and chatter free so no stoning, lapping or touch up is required. Hardened brass pilots won't scar or damage delicate rifling. A very handy tool to take along to the range or keep in your tool box, "just in case".

Product Description

Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner Industry

There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .17 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not difficult. It can be done with a minimum of tools and shop equipment. Your original investment is quickly paid off in the first few jobs. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS^® for the permanent bond between barrel and liner.

You’ll find that along with a relining, most of your customers will also want a blue job (Solder or ACRAGLAS will both stand hot bluing temps); a stock refinish and probably action work - “Make it like new” are the usual instructions. This, you can do.

When deciding to offer this service for your trade areas, you should also consider the price and quality of some new guns today and tightening up of your customers’ spending habits. By relining, they can often have a better gun for less money.

Perfect for updating and converting .22 LR and .22 WRM rifles to popular .17 High Standard. Button rifled to give optimum accuracy. Available in 1-9 twist for bullets 30 grains and heavier, and 1-10 twist for bullets under 30 grains.

Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. 8½" (21.6cm) x 11" (27.9cm). 16 pages. Instructions FREE, not included. Please request; not sent automatically or click here for a PDF.

WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.

SPECS: 4140 steel. .172" (4.36mm) groove dia. 5/16" (7.9mm) O.D., 26-3/8" (67cm) overall, 25" (63.5cm) usable length. Not chambered.

Product Description

Restore Headspace On Worn Guns

Cutter removes damaged metal from shotgun chambers with damaged rim-recess areas. Solder ring in place, recut rim.

SPECS: Cutter - M-7 H/Speed Steel. 5-¼" (13.3cm) long. Bronze pilot bushing. Rings - 1031 steel. Approx. ¼" (6.3mm) long.

Product Description

Face Off & Square Up Rifle & Handgun Muzzles

Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.

Product Description

Smooth Cutting-Fully Adjustable-Gives Professional Choke Alteration

For 10 and 12 gauge. Blade angle eliminates chatter; each cut is clean and controlled. Tightly choked 12 gauge barrels may require use of the "D" reamer before using the 10/12 gauge "E" reamer.

SPECS: Overall dimensions and expansion range as follows: C - 6-5/8" long, .282" sq. shank. .593"-.656". D - 6-7/8" long, .282" sq. shank. .656"-.718". E - 7-1/8" long, .332" sq. shank. .718"-.781". 1" = 25.4mm.

Product Description

Outstanding Quality Reamers By Dave Manson Help You Produce Accurate Chambers

Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots.  Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.

SPECS: M7 High speed steel, in-the-white. Solid pilot, six, straight flutes, right-hand cut. Rimfire reamers have 1⁄4" (6.3mm) diameter round shank. Centerfire reamers have 3⁄8" (9.5mm) square drive shank. .50 BMG has a 1⁄2" round shank. Pistol reamers available with barrel pilot diameter for semi-auto and single shot pistols. .38 Super Nonte headspaces on case mouth.

Product Description

A very handy tool to take along to the range or keep in your tool box, "just in case".

SPECS: Handle - aluminum 3½" (8.8cm) long.