Pistol Barrel Shilen.
Match-Grade Contoured & Unturned Blanks For Custom Revolvers, Silhouette Guns & More
Famous Shilen accuracy in a chrome moly or stainless barrel that's great for silhouette or custom hunting handguns. All stainless steel barrels are hand lapped at the factory.
Big Book Catalog, Issue:70, Page:237
SPECS: 4140 chrome moly or stainless steel in Twist and Length as stated for each product. Unturned Blank: 1.20" (30.48mm) diameter.
Select Match Remington Varmint(sendero) Countour Shilen.
Delivers Accuracy To Satisfy The Most Demanding Competition Shooter
Shilen’s Select Match Grade Varmint barrel for the Remington 700 is a masterpiece of machining and accuracy. This 28" stainless steel barrel has a Remington Varmint contour (a.k.a. a "Sendero,") and will fit Remington factory or aftermarket stocks with little-to-no barrel channel modification.
Hand chosen for its potential to provide the ultimate in accuracy, each Shilen Select Match Grade Varmint barrel is air gauge inspected to ensure groove diameters vary no more than .0003" from specs and bore uniformity varies no more than .0001" from end-to-end. Muzzle is cut at 90° to the bore and ready for crowning.
- Stress-relieved stainless steel for strength and durability
- Button rifled
- Bore polished to a gleaming finish
- Not threaded or chambered
Whether for a custom rifle or restoring one that has been “shot-out,” the Shilen Select Match Grade Varmint barrel delivers the level of accuracy and performance found only in the very best match-quality barrels.
Rimmed Rifle Cartridges Manson Precision.
Outstanding Quality Reamers By Dave Manson Help You Produce Accurate Chambers
Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
Big Book Catalog, Issue:71, Page:453
SPECS: M7 High speed steel, in-the-white. Solid pilot, six, straight flutes, right-hand cut. Rimfire reamers have 1⁄4" (6.3mm) diameter round shank. Centerfire reamers have 3⁄8" (9.5mm) square drive shank. .50 BMG has a 1⁄2" round shank. Pistol reamers available with barrel pilot diameter for semi-auto and single shot pistols. .38 Super Nonte headspaces on case mouth.
Long Forcing Cone Reamer Clymer.
Features 8 Flutes For Smooth, Uniform Cutting
Clymer’s version of the long forcing cone reamer for shotguns extends shorter factory forcing cones to a full 13⁄8" length, gently tapered for improved patterns and less recoil. These cutters have eight 8°, straight flutes that make them very smooth cutting reamers. They can be used to lengthen the chamber and cut the new forcing cone in one operation, or cut the forcing cone only, if desired. The long, non-cutting shank makes it possible to alter many barrels using only a large tap handle (shank is 7⁄16" square) to turn the reamer. An extension may be required on some barrels.
Big Book Catalog, Issue:71, Page:473
SPECS: HS steel. 8-7⁄8" (22.5cm) long. 31⁄2" (8.9cm) long shank. 12-1⁄2 oz. (35.4g).
Spiral Flute Long Forcing Cone Reamer Manson Precision.
8 Flutes Give Smooth, Efficient Cutting
Gives the forcing cone a gentle taper that reduces recoil and improves shot patterns. Provides a smooth transition for the shot cup, with less pellet deformation, for greater pattern density. Spiral flutes give a chatter-free cut on all types of barrel steel.The long shank lets you alter most barrels using only a large tap handle to turn the reamer.
Big Book Catalog, Issue:71, Page:474
SPECS: M-7 High Speed Steel. 8-flute, right hand cut with left hand spiral. 9" (22.9) long, 3-½" (8.9cm) shank, 7/16" square.
Gilchrist Precision Choke Reamer Chadwick & Trefethen.
Aligns Reamer Concentric To The Bore For Accurate Choke Adjusting Or Removal
Enters through the breech and pilots off the bore for precise cutter to bore alignment. Expandable, angle blade reamer fine tunes choke size to improve patterns or removes choke prior to screw-in choke tube installation. Requires two Clymer Choke Tooling Bushings to center the cutter in the bore. Requires purchase of the Gilchrist Handle and two of the proper Clymer bore bushings for use with any of the reamers.
Big Book Catalog, Issue:71, Page:472
SPECS: Steel. Handle 25-½" (65cm) long. Reamers 13" (33cm) long. Expansion range: 20gauge "C" .593"- .656". 12gauge "D" .656" - .718". "E" .718" - .781". Select correct diameter bushing for 12 and 20 gauge from Clymer chart listed elsewhere. Pilots not available for 10 and 16 gauge. Tight choked 12 gauge barrels may require the use of the "D" reamer before using the "E" reamer.
Spiral Flute Long Forcing Cone Reamer Brownells.
Smooth Cutting Reamers Improve Pattern Density
Lengthening the forcing cone area decreases pellet deformation and felt recoil for a dramatic improvement in pattern density, shooting comfort and overall shotgun performance. Custom-made reamers with five, spiral flutes increase the cutting surface area for a smooth, chatter-free cut on all types of barrel steel. Do not use on chrome lined bores. Hex-drive shank allows the use of a standard square drive socket and T-handle.
Big Book Catalog, Issue:71, Page:473