Web Analytics Made Easy -
    StatCounter
Call us now +000 1584 2578

Bartlein Benchrest Barrels Bartlein Barrels

"Today, if you do not want to disappoint, Check price before the Price Up.Bartlein Benchrest Barrels Bartlein Barrels You will not regret if check price."  Bartlein Benchrest Barrels Bartlein Barrels compare prices

Content:

Bartlein Benchrest Barrels Bartlein Barrels.

$451.99
Bartlein is a barrel maker owned and operated by shooters who have been involved in barrel making for many years. They built ...

Product Description

Bartlein is a barrel maker owned and operated by shooters who have been involved in barrel making for many years. They built state-of-the-art cut rifling machines which Bartlein says can hold uniform twist rates to the 4th decimal point. Several nationally known benchrest shooters shoot Bartlein barrels. We have Bartlein barrls on many of our own benchrest rifles, and they shoot well. Heavy Varmint Blank 6mm 1.250 inch Tapering to .900 inch 1-14 inch Twist, 29 inch Blank. Weighs: 7.5 lbs. 6 mm Light Varmint Blank 1.200 inch Tapering to .875 inch 1-13.5 inch Twist, 29 inch Blank. Weighs: 7 lbs. 6.5mm Heavy Varmint blank 1.250 inch Tapering to .900 inch 1-8.5 inch Twist, 31 inch Blank. Weighs: 7.8 lbs. 6mm Heavy Varmint Blank 1.25 inch Tapering to .900 inch 1-8 inch Twist, 31 inch Blank. Weighs: 7.8 lbs. 22 cal Heavy Varmint Blank 1.25 inch Tapering to .900 inch 1-8 inch Twist, 29 inch Blank. Weighs: 7 lbs.


Sinclair, Issue:5B, Page:238

SPECS: 22 call land/groove diameter: .218/.224.  May require live pilot with appropriate sized pilot.  SOLID PILOT MAY NOT FIT. 243/6mm land/groove diameter: .237/.243.  6.5mm land groove diameter: .256/.264.

Power Custom Brass Muzzle Crowning Lap Brownells.

$13.99 - $45.99
Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon ...

Product Description

Genuine Brass Laps For All Rifle & Handgun Barrels

Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill.


Big Book Catalog, Issue:71, Page:457
SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of each size.

Short, Piloted Barrel Liner Drill Brownells.

$63.99 - $103.99
If you can silver solder or braze your own extension onto a Liner Drill, these standard length, deep hole drills can save you ...

Product Description

Save Money By Adding Your Own Extension

If you can silver solder or braze your own extension onto a Liner Drill, these standard length, deep hole drills can save you money. Piloted to follow the original bore and have all the same high-grade features as our .22 Liner Drill: Deep hole flute geometry and special helix angle to prevent jamming; reinforced web for accurate hole dimensions; nitrided lands for long life.


Big Book Catalog, Issue:71, Page:170
Big Book Catalog, Issue:71, Page:171
Big Book Catalog, Issue:71, Page:446

SPECS: High speed steel. Pilot diameter/overall length; .22 - .215"/9.5", .25-20 - .248"/11", .32-20 - .302"/11.6".

90° Muzzle Facing Cutter & Brass Pilot Brownells.

$100.99 - $101.99
Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and ...

Product Description

Face Off & Square Up Rifle & Handgun Muzzles

Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.


Big Book Catalog, Issue:71, Page:458
SPECS: Facing Cutter – Hardened steel. 3¼" (8.2cm) long (except .165" cutter, 2-3/8" (6cm) long). 1" (2.5cm) or .750" (19mm) diameter as required. Handle – Aluminum. 3½" (8.9cm) long. 3 oz. (85 g). Pilot - Brass. 1¼" (3.2cm) long. Packaged in a polypropylene box.

Throating Reamers Clymer.

$55.00
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional ...

Product Description

Finest Workmanship & Quality; Made In USA From M-7 High Speed Steel

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need.


Big Book Catalog, Issue:71, Page:454
SPECS: THROATERS - 5, left-hand, spiral flutes. .002" larger than bullet diameter. 2½° throat angle. Used to lengthen throat to increase freebore. ¼" diameter round shank. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

223 & 308 Chamber Reaming Kits Clymer.

$163.00
High-quality finish reamer and precision made headspace gauges make easy work when chambering a new barrel. Precision machined from high-quality steel for a ...

Product Description

Complete Kits For Safe, Accurate Chambering

High-quality finish reamer and precision made headspace gauges make easy work when chambering a new barrel. Precision machined from high-quality steel for a lifetime of service when properly cared for. Finish reamers can be used in your lathe or hand-turned; perfect for fitting short chambered barrels. Includes headspace gauge to accurately measure chamber size and ensure a tight, safe chamber. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Made to SAAMI specs.


AR-15, Issue:11, Page:087
Big Book Catalog, Issue:71, Page:089
Big Book Catalog, Issue:71, Page:454
SPECS: Reamer - M7 high speed steel, in-the-white. Right-hand cutting, six flutes. Solid pilot, integral throat. 7⁄16" round shank with 3⁄8" square drive. Headspace Gauge - Steel, in-the-white.

45° Muzzle/cylinder Chamfering Cutter & Steel Pilot Brownells.

$79.99 - $99.99
45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. ...

Product Description

Break Sharp Edges On Rifle & Handgun Muzzles; Get Faster Cylinder Filling On Revolvers

45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

  Steel One Caliber Set   Chamfering & Facing Combo Sets
  Brass One Caliber Set   45° Cutter & Brass Pilot
  90° Cutter & Steel Pilot   Steel Pilot Only
  90° Cutter & Brass Pilot   Brass Pilot Only

Big Book Catalog, Issue:71, Page:458
SPECS: Chamfer Cutter – Hardened steel. 3¼" (8.25cm) long (except .165" cutter, 2-3/8" (6cm) long). ½" (12.7mm) or 5/8" (15.8mm) diameter as required. Handle – Aluminum. 3½" (8.9cm) long. 3 oz. (85 g). Pilot - Hardened steel. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917. Packaged in a polypropylene box.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *