Rifled Shotgun Muzzle Facing Pilots Brownells

Product Description

Safe Muzzle Touch-Up For Rifled Slug Barrels

Polished brass pilots turned to uniform concentricity make it easy to cleanup and square-off dinged or re-cut muzzles on 12 and 20 gauge, rifled slug barrels without damaging the lands and grooves. Use with Brownells 1" Diameter, 90°, Muzzle Facing Cutter for best results. Measure bore I.D. between tops of lands to determine closest pilot listed for your barrel. If your barrel’s diameter isn’t listed, select the closest, smaller size. Available in three diameters for 12 and 20 gauge, rifled slug barrels.

SPECS: Brass. 2" (5.1cm) long. 12 Gauge - Pilots available to fit bore diameters: .720". 20 Gauge - Pilots available to fit bore diameters: .609". 3⁄16" shank fits Brownells Muzzle Facing Cutter.

Product Description

Bartlein is a barrel maker owned and operated by shooters who have been involved in barrel making for many years. They built state-of-the-art cut rifling machines which Bartlein says can hold uniform twist rates to the 4th decimal point. Several nationally known benchrest shooters shoot Bartlein barrels. We have Bartlein barrls on many of our own benchrest rifles, and they shoot well. Heavy Varmint Blank 6mm 1.250 inch Tapering to .900 inch 1-14 inch Twist, 29 inch Blank. Weighs: 7.5 lbs. 6 mm Light Varmint Blank 1.200 inch Tapering to .875 inch 1-13.5 inch Twist, 29 inch Blank. Weighs: 7 lbs. 6.5mm Heavy Varmint blank 1.250 inch Tapering to .900 inch 1-8.5 inch Twist, 31 inch Blank. Weighs: 7.8 lbs. 6mm Heavy Varmint Blank 1.25 inch Tapering to .900 inch 1-8 inch Twist, 31 inch Blank. Weighs: 7.8 lbs. 22 cal Heavy Varmint Blank 1.25 inch Tapering to .900 inch 1-8 inch Twist, 29 inch Blank. Weighs: 7 lbs.

SPECS: 22 call land/groove diameter: .218/.224.  May require live pilot with appropriate sized pilot.  SOLID PILOT MAY NOT FIT. 243/6mm land/groove diameter: .237/.243.  6.5mm land groove diameter: .256/.264.

Product Description

Genuine Brass Laps For All Rifle & Handgun Barrels

Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill.

Product Description

Save Money By Adding Your Own Extension

If you can silver solder or braze your own extension onto a Liner Drill, these standard length, deep hole drills can save you money. Piloted to follow the original bore and have all the same high-grade features as our .22 Liner Drill: Deep hole flute geometry and special helix angle to prevent jamming; reinforced web for accurate hole dimensions; nitrided lands for long life.

SPECS: High speed steel. Pilot diameter/overall length; .22 - .215"/9.5", .25-20 - .248"/11", .32-20 - .302"/11.6".

Product Description

Face Off & Square Up Rifle & Handgun Muzzles

Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.

Product Description

Finest Workmanship & Quality; Made In USA From M-7 High Speed Steel

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need.

Product Description

Complete Kits For Safe, Accurate Chambering

High-quality finish reamer and precision made headspace gauges make easy work when chambering a new barrel. Precision machined from high-quality steel for a lifetime of service when properly cared for. Finish reamers can be used in your lathe or hand-turned; perfect for fitting short chambered barrels. Includes headspace gauge to accurately measure chamber size and ensure a tight, safe chamber. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Made to SAAMI specs.