Rifle Barrels Lothar Walther Precision Tool

Product Description

Quality & Craftmanship Produces Barrels Of Unparalleled Accuracy

Countless numbers of world champion shooters have depended on Lothar Walther rifle barrels for consistently high performance, now you can too. Each and every barrel is meticulously crafted; button rifled in a closely controlled environment that assures bore uniformity to within .000227", then painstakingly lapped to produce a superior rifle barrel capable of outstanding accuracy and long-lasting performance. Contoured blanks are finish machined and unchambered.

Product Description

Keeps Reamer Aligned To Barrel For Accurate Chambers

Allows the reamer to remain parallel with the bore, while compensating for up to .030" of misalignment or wear between tailstock and chuck. Wide bearing surface, plus hardened and ground components give smooth movement with no cam-to-center lockup. Low mass, aluminum head lets the tool quickly respond to the slightest out of roundness. Hardened steel bushing eliminates wear in the reamer socket. Features interchangeable shanks; holder is reamed to accept shank with #2 Jacobs taper. Furnished with 1/2" diameter straight shank.

Product Description

Superb Stainless Steel Barrels For Top Accuracy

Hand chosen for the ultimate in accuracy. Button rifled, stress relieved, hand lapped, air gauged and optically inspected to ensure that each one falls within the Select Match category. That means within .0003" of specs and uniform over the entire bore to within .0001". Not threaded or chambered.

SPECS: 416 stainless. #7 contour only 28" (71.2cm) long. (See Shilen chart below for dimensions).

Product Description

Improves Accuracy, Helps Eliminate Fliers

Easy to use, hand turned reamer opens the cylinder throat to a uniform diameter for best accuracy with lead and jacketed bullets. Removable pilots let you select the correct pilot for the closest possible fit to individual chambers. .45 Caliber corrects out of spec, smaller-than-bore-diameter cylinder throats on .45 Colt and other .45 caliber revolvers. Opens throat to .4525". Provided with .4480" diameter pilot. .44 Caliber fits .44 Magnum, .44 Special and .44-40 revolvers. Opens throat to .431". Furnished with .4270" pilot. .357 Caliber from .3545" to .357". Open the throat to .358". .357 furnished with a .354" pilot. Pilot Packs contain six additional pilots in .0005" increments. .45 Caliber from .4485" to .4510" .44 Caliber from .4275" to .4300".

SPECS: High-speed steel. 4" (10cm) long, ¼" shank, 6 flute, helical ground.

Product Description

Break Sharp Edges On Rifle & Handgun Muzzles; Get Faster Cylinder Filling On Revolvers

45° chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45° Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a ½" diameter, 45° cutter.

Product Description

No Lathe Way To Cut A Perfect Crown In Minutes & Improve Accuracy

Hand driver with spring-loaded adapter provides a fast, no lathe way to cut a smooth, concentric muzzle crown on both rifle and handgun barrels for an immediate improvement in accuracy. Expandable pilots provide precise alignment of the facing cutter with the bore. Includes two facing cutters for 0° or 11° crowns, each with precision ground three-blade inserts that quickly and easily remove the toughest material and provide a perfectly square barrel crown. Outside chamfer cutter deburrs the sharp edges for a clean, even finish. Kits include 0° facing cutter, 11° facing cutter, outside chamfer cutter, and two or five pilots depending on kit, plus a 1/8" pilot wrench, 5/64" allen wrench, setup gauge, power driver or manual handle, adapter, instructions, and storage case. Manual version includes a manual handle and adapter for slow even cuts and precise indexing of muzzle brakes. 2-Pilot Kit contains .22 and .30 caliber pilots. 5-Pilot Kit contains .22, .30, 6mm, 7mm, and .338 caliber pilots.

SPECS: Facing Cutters - Steel, carbide inserts. Chamfer Cutter – Steel. 1.25” (32mm) diameter. Pilots - Steel, 8¾” (22.2cm) overall length. Kits include manual handle, 0° facing cutter,11° facing cutter, outside chamfer cutter, (2 or 5) pilots, 1⁄8" pilot wrench, 5⁄64" allen wrench, setup gauge, power driver, adapter, instructions, and storage case. 2-Pilot Kit - .22 and .30 caliber pilots. 5-Pilot Kit - .22, .30, 6mm, 7mm, and .338 caliber pilots.

Product Description

Match-Grade Barrel Blanks From U.S.'s Oldest Barrel Maker

Famous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved.

SPECS: 4140 Chrome moly and stainless steel. "Finished" dimensions are shown in chart. Unturned Blanks will be .025" (.63mm)-.050" (1.3mm) larger in diameter and 1-½" (3.8cm) longer than shown. Not threaded or chambered. ORDERING: Advise: 1) Complete 9-digit Stock # from chart; 2) Caliber 3) Twist 4) Contour. If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full payment in Advance and are non-cancelable and non-refundable. Not shipped prepaid.