Web Analytics Made Easy -
    StatCounter
Call us now +000 1584 2578

Hss Semi-Auto Pistol Sight Base Cutter Brownells

"Today, if you do not want to disappoint, Check price before the Price Up.Hss Semi-Auto Pistol Sight Base Cutter Brownells You will not regret if check price."  Hss Semi-Auto Pistol Sight Base Cutter Brownells on line

Content:

Hss Semi-Auto Pistol Sight Base Cutter Brownells.

$31.99 - $32.99
Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement ...

Product Description

60\ & 65\ Shoulder x .330"

Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. High speed steel, 2" (5cm) long, 3⁄8" (9.5mm) diameter shank. 60° or 65° shoulder. DO NOT EXCEED 700 rpm, HIGHER SPEED WILL BREAK TEETH.


1911, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:152
Big Book Catalog, Issue:71, Page:478

Cryo-Treated Dovetail Cutter Brownells.

$39.99 - $59.99
We’ve taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material ...

Product Description

Longer Cutting Life; Reduces Replacement Costs

We’ve taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we’ve added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break.


Big Book Catalog, Issue:71, Page:477

SPECS: Cryo-treated, high-speed steel.

Jobber Length Maxi Set Triumph Twist Drill Co..

$730.99
Top Rated Supplier of Firearm Reloading Equipment, Supplies, and Tools - Colt

Product Description

This Is It-Never Want For The Right Size Again


Big Book Catalog, Issue:71, Page:445
SPECS: 115 pieces in 14½" x 4¾" x 2½", 5 tray box. U.S. made.

Carbide Semi-Auto Pistol Sight Base Cutter Brownells.

$85.99 - $89.99
Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement ...

Product Description

60\ & 65\ Shoulder x .330"

Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is  .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistols made from hardened steel. 2" (5cm) long, 3⁄8" (9.5mm) diameter shank. 60° or 65° shoulder.


1911, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:152
Big Book Catalog, Issue:71, Page:478

1911 Carbide Dovetail Sight Base Cutter Brownells.

$90.99
These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita ...

Product Description

65\ Shoulder x .495"

These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita and Novak Lo-Mount 1911 Auto sights. Use ¼" carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 Auto Pistols, this cutter is one that you will use frequently in your custom work. CAUTION: For use in milling machine only. Much harder and longer-lasting than HSS cutter. Use on hardened Colt factory slides. Solid carbide, 2" (5cm) long. .495" diameter cut. ½" (12.7mm) diameter shank. 65° shoulder.


1911, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:152
Big Book Catalog, Issue:71, Page:478

Barrel Liner Drills Brownells.

$106.99 - $128.99
For the gunsmith who does not want to make his own drill extension, our Hi-Speed steel drills are designed especially for deep hole ...

Product Description

Special Deep-Hole Drill For Installing Barrel Liners

For the gunsmith who does not want to make his own drill extension, our Hi-Speed steel drills are designed especially for deep hole drilling for Brownell Barrel Liners. The hole for the liner must be drilled slightly more than halfway from each end, and the ONLY way to ensure proper joining when using a hand drill is to use these piloted drills. Special, helix angle eliminates the tendency for the drill to “pull” itself into the material and jam, saving time and headaches. The extra cost for this premium quality drill is far cheaper than ruining a customer’s gun with an off-center hole. Given proper care, will last a lifetime.


Big Book Catalog, Issue:71, Page:171
Big Book Catalog, Issue:71, Page:445
SPECS: Hi-Speed steel. 15" (38.1cm) OAL. Handles barrels up to 25" (63.5cm) length maximum. Pilot length: 1" (2.5cm). Pilot diameter: .22 - .216" (5.5mm); .25-20 - .247" (6.8mm); .38-40 - .391" (9.9mm); .44-40 - .419" (10.6mm).

Carbide Front Sight Dovetail Cutter Brownells.

$69.99
Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow ...

Product Description

60\ & 65\ Shoulder x .300"

Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300" (7.3mm) dia. cut, 3⁄8" (9.5mm) dia. shank. 60° or 65° shoulder.


1911, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:152
Big Book Catalog, Issue:71, Page:478

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *