Web Analytics Made Easy -
    StatCounter
Call us now +000 1584 2578

Aluma-Hyde® Ii Brownells

"Today, if you do not want to disappoint, Check price before the Price Up.Aluma-Hyde® Ii Brownells You will not regret if check price."  the cheapest Aluma-Hyde® Ii Brownells online

Content:

Aluma-Hyde® Ii Brownells.

$12.99 - $13.99
The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other ...

Product Description

Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents

The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. Also available is Semi-Gloss Black which can be used to compliment the matte finishes or give you a black finish that is less matte if you desire. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts.

Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.

Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.


1911, Issue:04, Page:062
AR-15, Issue:04, Page:077
Big Book Catalog, Issue:71, Page:400

SPECS: 12 oz. (340 g) aerosol can.

Oxpho-Blue® Brownells.

$10.99 - $44.99
Originally developed for the occasional bluer who is not equipped to completely polish a gun prior to bluing, Oxpho Blue - because ...

Product Description

Finest Professional Cold Blue On The Market-Period!

Originally developed for the occasional bluer who is not equipped to completely polish a gun prior to bluing, Oxpho Blue - because of its ease of application and remarkably superior results - has become a favorite of the professional gunsmith as well. With Oxpho-Blue, all you need do in most cases, is dampen a piece of cotton flannel and give the area a good rubbing. The chemical goes through the oil on the gun, removes thin rust and blues the steel underneath. No after-rust. For looks, the final finish was not intended to approach the beauty of the well-polished, hot-blued gun. It has developed, however, that in the hands of a careful craftsman, not only is the Oxpho-Blue finish beautiful, but it is also more durable and weather resistant than any other known chemical finish.

Oxpho-Blue has other outstanding features worthy of note:

  1. Absolutely no after-rust.
  2. Phosphate-like surface forms under the blue.
  3. Rust removing qualities of the solution, making it unnecessary to remove mild rust in the usual manner.
  4. "Wetting" characteristics of the solution, giving it the ability to penetrate oil, dirt, etc., on the surface of the gun; blue the metal underneath; remove rust and dirt; leave the gun blued and ready for oiling.
  5. Beauty and high durability of the finish: vigorous rubbing with No. 0 steel wool is one of our favorite application methods - the more rubbing, the more brilliant it comes and, since abrasion is part of the process, normal contact from gun cases, brush and clothing won't wear your bluing.
    (Note: It is possible to get a surface so dense with Oxpho-Blue that water will puddle on it!)
  6. For Neighbor Kid and Mr. Average Sportsman, a beat-up gun can be made to look quite presentable by following this recent application technique; dampen a shoe shine cloth with Oxpho-Blue and blue the gun with a shoe shine motion - without taking too much trouble to remove old dirt, grease, rust, etc. This particular gimmick actually obsoletes all other kinds of bluing for retail sale, for any youngster can make his old man's gun look quite presentable. For gun club members, neighborhood shooters, etc., one bottle takes care of the lot. (The rub-on features works wonders on tools and instruments which have been blackened and show bright along the edges: just dampen a cloth with Oxpho-Blue, rub the bright areas briskly and they are as black as before, but tougher.)


Big Book Catalog, Issue:71, Page:396

SPECS: 4 fl. oz. (118ml),  or 32 fl. oz.

Oxynate® No. 7 Brownells.

$159.99 - $1,249.99
OXYNATE NO. 7 has, for more than 55 years, been the popular bluing salts for the professional gun trade. For quantity work (one ...

Product Description

HOT CHEMICAL BLUING COMPOUND MEETS Mil Spec C13924BAM1, Class 1, Grade A Finest Professional Gunsmith-Developed, Hot Bluing Salts Available on the Market Today

OXYNATE NO. 7 has, for more than 55 years, been the popular bluing salts for the professional gun trade. For quantity work (one to a dozen guns a week or month) the cost per gun is extremely low. Oxynate No. 7 is manufactured by one of the country’s chief producers of manufacturer’s chemicals and sold by us to the gun trade by exclusive license. This is mentioned so that you’ll appreciate the vast research laboratories available to our users of Oxynate No. 7- and that you are using the best gun blue modern science and research can produce.

Our copyrighted Instructions are, we feel, the most complete offered to the trade. Every step, every complication, every question the gun bluer can encounter is detailed in this booklet. The answers and suggestions are not from any one individual but are those of several thousand gun men who have used Oxynate No. 7 successfully during the past 55+ years. Ask for a copy today.

Note: Requires Additional Hazardous Materials Surcharge. Please call for freight charges.

Big Book Catalog, Issue:71, Page:392
SPECS: 40 lb. (18.1 kg) net weight can or 400 lb. (181.4 kg) net weight drum. Normal mix is 10 lbs. (4.5 kg) per gallon of water. Full instructions included.

Water Displacing Oil After-Bluing Rust Prevention Brownells.

$34.99 - $339.99
The real professional - and longtime favorite - "after-bluing", one-step oil and protection treatment. Specially formulated; the molecules of oil actually displace ...

Product Description

Best Possible "After-Bluing" Oil Removes Water, Neutralizes Salts, Acids, And Fingerprints

The real professional - and longtime favorite - "after-bluing", one-step oil and protection treatment. Specially formulated; the molecules of oil actually displace the molecules of water still on the surface of the gun as it comes out of the final hot water rinse. Gives the gun a completely protected surface, ensuring your time spent on polishing and bluing will not be spoiled by rust under the oil. Also a superior rust preventive which neutralizes fingerprints, body acids and oils from handling and shooting. Provides a protective film with that proper "oiled and protected" feel preferred by many serious shooters and gun people. The standard by which other "after-bluing" oils are judged.


Big Book Catalog, Issue:71, Page:394

SPECS: Net contents; 1 qt. (946ml) or 1 gal. (3.8L) in metal can, 5 gal. (19L) in bulk container.

Bake-On Finish Curing Oven Brownells.

$2,099.99
Our high efficiency oven is custom engineered to ensure uniform and complete part curing while delivering a “tough-as-nails” baked-on finish when using ...

Product Description

Provides A Tough-As-Nails, Oven-Baked Finish

Our high efficiency oven is custom engineered to ensure uniform and complete part curing while delivering a “tough-as-nails” baked-on finish when using Brownells Gun-Kote or Teflon®/Moly oven cure finishes. Advanced technology combines two separate heating elements with a high-tech interior surface to optimize airflow and ensure consistent temperatures that help prevent hot spots, surface blemishes, and discolorations. Thermostat adjustable from 100° F to 400° F for precise temperature control during large or small production runs. Adjustable, 60 minute countdown timer turns oven on when set; audible bell alerts you when time is up, and oven turns off. Front mounted temperature gauge provides accurate, real-time temperature monitoring. Oven panels are insulated with over 5 lbs. of high density, energy-saving fiberglass to prevent heat loss and reduce operating costs. Four, removable drying racks allow you to optimize interior space and maintain full capacity. Two ceiling mounts, with five holes each, allow you to hang parts up to 42" long. Extra long power cord for easy setup in a variety of locations, plus a panel-mounted electrical fuse for fail-safe, overload protection. High-temp, matte black surface finish is corrosion resistant. Holds up to five barreled rifle actions, plus numerous handguns and small parts.


Big Book Catalog, Issue:71, Page:399

SPECS: Steel, black matte, high-temp finish. 15” (38cm) long, 17” (43cm) wide, 48½” (123cm) high. Internal Dimensions - 10” (25cm) long, 13” (33cm) wide, 44” (112cm) high. Temperature Range - 100° F (38°C) to 400° F (204°C). Current Draw - 7.4 amps @ 120 VAC. UL approved heating elements.

Formula 44/40® Instant Gun Blue Brownells.

$10.99 - $152.99
44/40 has long been one of the cold-blue standards in the industry and we here at Brownells are delighted to have purchased ...

Product Description

Fast, Easy, Wipe-On, Wipe-Off Application Original High-Speed Formula Deep Penetrating

44/40 has long been one of the cold-blue standards in the industry and we here at Brownells are delighted to have purchased the original, high-speed formula and the legendary name and brought it back to its many fans.

44/40's familiar bluing action is almost magic; simply dampen a patch with 44/40, wipe it on and wipe it off immediately with a dry one. The coloring action happens instantly and the color penetrates deep into the metal for a long-lasting finish. There's no need to soak or rub for long periods. Surface preparation's easy, too; for scratches, just clean and degrease as you normally would and apply 44/40. As a blue for external/internal parts and pieces, the procedure is just as easy. Bring the surface to the finish you want, clean it and wipe-on, wipe-off. 44/40 will do the job beautifully. And, it's great for other jobs around the shop, too. The quick action and dark color makes 44/40 an excellent substitute for traditional layout fluids. The steel is darkened quickly so your layout lines will show up. There's no surface buildup of "paint" to foul up dimension readings and nothing to peel or flake off. Coat lathe and cutting tools before sharpening so you can see where you're grinding. Use 44/40 to age brass and copper in restorations, or just to reduce glare and reflection. You can literally do thousands of jobs with 44/40!

You need 44/40 on your bench; the highly active formulation makes sure that you're going to be able to expertly touch-up virtually any non-stainless gun steel and professionally blend the repair into the original finish.

For the gun shop or store, there's the proven, "sells-itself" display. It comes with a dozen, 2 ounce bottles of 44/40 in a brightly labeled, attention-getting, countertop display tray, along with a test bottle and a supply of nails so your customers can dip into 44/40 to see just how quick and easy it really is. Plus, you get cleaning patches for the "wipe-off" part of the procedure.

*Requires $17.00 Per Carton Hazardous Materials Surcharge. Cannot ship outside Continental United States. Ship UPS Ground only within U.S.


Big Book Catalog, Issue:71, Page:396

SPECS: 2 oz. (59.12mL), 1 pt. (473mL), 1 qt. (946mL), 1 gal. (3.8L). Counter Display includes 12, 2 oz. bottles of 44/40, 1, ½ oz. test bottle, 18 nails and 18 patches, plus molded plastic countertop display. Carton contains 12, 2 oz. bottles. Shipping prepaid on 24 carton single purchase.

Oxpho-Blue® Creme Brownells.

$9.99
The same easy application, tough finish and superb results as our liquid Oxpho-Blue with the added benefits of the creme formula It won't evaporate ...

Product Description

Toughest Cold Blue In A No-Run Creme

The same easy application, tough finish and superb results as our liquid Oxpho-Blue with the added benefits of the creme formula…It won't evaporate away or run off, giving plenty of work time.

Cannot ship outside Continental United States. Ship UPS Ground only within U.S.

Big Book Catalog, Issue:71, Page:396
SPECS: 4 oz. (118.2ml), 8 oz. (236ml), 16 oz. (472ml) net contents.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *