Grip Plug For Glock® Jentra

Product Description

Keeps Dirt Out of Grip Frame

Snaps into the opening at the rear of the Glock® grip frame for a cleaner appearance, plus keeps dust, dirt, snow and water out of the gun. Creates a perfect location for adding extra weight to competition guns or to counter recoil on light, carry guns. Easily removed, does not alter gun. See specs for proper fit to your model of Glock.

 

SPECS: JP-1 Fits Gen 3 models: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Fits Gen 3 models: 26, 27, 33.. JP-3 Fits Gen 3 model: 30. JP-4 Fits Gen 3 models: 20SF, 21SF. JP-6 Fits the following Gen 4 models without backstraps: 17, 19, 22, 23, 31, 32, 34, 35. JP-7 Fits the following Gen 4 models without backstraps: 20, 21, 41. JP-8 Fits the following Gen 4 models without backstraps: 26, 27, 33. JP-9 Fits the following Gen 4 models with backstraps: 17, 19, 22, 23, 31, 32, 34, 35.

Product Description

Fills The Opening In Glock Frame For Smoother Reloading

Plastic plug installs in the bottom rear cavity of the frame to fill the opening found in Glock® pistols. Front “lip” forms a tight, flush bond with the mag well to help make sure the mag goes where it should, smoothly. Keeps dirt and debris from finding its way inside the pistol and gives a clean, smooth look. Uses the lanyard hole for retention to snap firmly into place. Glock® Plus Zero fits Models 17 through 25, 31, 32, 34, 35, 37, and 38. Gen 4 Grip Frame Inserts allow for use of the factory interchangeable backstraps. Gen 4 Full & Mid model fits Generation 4 Glock® models 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model fits Generation 4 Glock® models 26/27/33/39. Other inserts fit the Glock® models indicated in the price lines below. Does not add extra rounds.

SPECS: Impact-resistant plastic, black. One per pack.

Product Description

Take Down Tool Stows Inside Grip Cavity

Vickers Tactical Grip Plug and Takedown Tool for Glock® provides a handy tool for field stripping your pistol, and conveniently stores inside the pistol grip cavity when not needed. Tool is similar to the Glock factory tool.

The unique shape of the Vickers Tactical Grip Plug and Takedown Tool even acts as a 'ramp' and index point for rapid, accurate magazine insertion.

• Smooth exterior shape is fully radiused
• Corrosion resistant stainless steel tool
• Over-molded glass filled nylon handle
• Encourages quicker reloads
• Fits Glock Gen 4 models ONLY

The handy Vickers Tactical Grip Plug and Takedown Tool for Glock also helps seal off the grip cavity, preventing dirt, sand and mud from entering the trigger control components.

Product Description

The Vickers Tacticaltm GGT01 offers some unique features for the Glock®. A stainless steel takedown tool is conveniently stowed in the pistol grip cavity. This enables the shooter to field strip the weapon for proper cleaning and maintenance. The unique shape of the tool acts as a 'ramp' and indes point for rapid, accurate magazine insertion. The GGT01 seals off the grip cavity preventing dirt, sand, and mud from entering the trigger contro components that could possibly disable the weapon. 300-series stainless steel tool is overmolded into a glass-filled nylon handle for years of rugged use. Fits Gen3 models only.

Product Description

The Ghost Glock Gen 4 grip plug kit includes two plugs. One to be used with the back strap and another to be used without the back strap. The drop-in GHOST Grip Plugs are designed so that you can operate your Glock in a hostile environment, without the possibility of pistol fouling debris entering your pistol's mechanism through the grip opening behind the magazine well. The GHOST G-Plugs are designed to block the maximum amount of debris, while providing an improved chute to speed reloading. The GHOST G-Plugs also feature a bevel, assisting in magazine removal should a malfunction occur. To use, simply insert the GHOST Grip Plug that fits your application into the space

SPECS: Fits the following GEN 4 GLOCK19, 17, 22, 23, 31, 32, 34, 35, 37 & 38.DOES NOT FIT SF GUNS.

Product Description

Adds Weight, Improves Reliability, Speeds Mag Changes

Brass plug fills recess at the rear of grip and provides additional weight to reduce recoil and improve balance. Helps prevent “limp-wrist” malfunctions, especially in weak-hand shooting. Mag chute aids fast, sure reloads.

SPECS: Brass, matte black finish. 2.4” (64mm) long. 3.5 oz. (99g) weight. 17 fits 17/20/21/22/34/35/37, 19 fits 19/23. May require minor fitting, but no modifications to gun.

Product Description

Keeps Dirt & Debris Out Of The Backstrap Channel

Ghost’s Grip Plug for Glock® 42 / 43 pistols is a drop-in part that blocks debris from entering your pistol's mechanism through the opening behind the magazine well. Requires no permanent modifications to your pistol: simply push the Ghost Grip Plug into the cavity and friction holds it securely inside the frame. The plug slightly compresses during insertion, then expands in the cavity for a snug fit that'll stand up to the 42 / 43's snappy recoil.

• Smooth, flush fit
• Durable molded polymer construction
• Black color matches the rest of your Glock 42 / 43

The Ghost Grip Plug also provides a smooth exterior surface that eliminates the risk of the open cavity snagging on clothing, your holster, or other gear. As a bonus, it gives your Glock® 42 / 43 a clean, finished look.