"Today, if you do not want to disappoint, Check price before the Price Up.Magazine Extension Support Clamp Nordic Components You will not regret if check price." discount Magazine Extension Support Clamp Nordic Components
Magazine Extension Support Clamp Nordic Components.
Provides Extra Support
Strong, lightweight aluminum clamp attaches securely to barrel to provide extra support for extended magazine tube. Eliminates unwanted vibration under recoil to ensure smooth, reliable feeding of rounds. Low-profile design, rounded edges, and flush-mounted hex-head machine screws prevent snags and damage to patrol car interiors; hardcoat anodized surface adds strength and exceptional resistance to surface abrasion. Available in Standard model and Tactical Rail configuration with Picatinny-type accessory rail that may be positioned on left or right side of clamp for mounting flashlights and other accessories. Also available for Mossberg.
Big Book Catalog, Issue:71, Page:205
SPECS: Aluminum, hardcoat anodized, black, matte finish. Fits shotguns equipped with Nordic and DPMS extension tubes. 12 gauge only. Standard - 2 oz. (57g) weight. Rail - 2.6 oz. (73g) weight. Mossberg - Fits Mossberg shotguns, including the 590 and 930SPX.
Shotgun Receiver Mount Picatinny Rail Mesa Tactical Products, Inc..
Mount Optics Or Tactical Sights
One-piece, MIL-STD 1913 Picatinny rail allows mounting a variety of optics and tactical sights on popular Mossberg, Remington, and Benelli shotguns. Streamlined, low profile design installs to the top of the receiver for a smooth “built-in” appearance. Four slotted flat head screws and washers secure rail to receiver for exceptional holding power. Precision machined from 6061-T6 aluminum, then mil-spec Type III hardcoat anodized for added strength. Fits shotguns with factory drilled and tapped receivers or receivers custom that require drilling and tapping for appropriate threads.
Big Book Catalog, Issue:71, Page:256
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Fits factory drilled and tapped receivers. Includes mounting hardware and instructions. Mossberg – 5½" (13.9cm) long. Fits 1997 and later-mfr pump action shotguns; can be installed on 930 semi-auto with additional fitting. Remington 870 – Available in 5½" (receiver length). Drop-in fit to 870; can be installed on 1100 or 11-87 semi-auto with additional fitting. Comes with 6-48 screws. Benelli M2 - 4½" (11.4cm) long. Drop-in fit on M2 Tactical; can also be installed on round-top M1 after drilling and tapping receiver. Comes with 4 slotted flat head screws and 4 washers.
Quick-Release Accessory Mount American Defense Manufacturing.
Patented, Easy-On/Easy-Off System For Mounting Lights, Vertical Grips & Other Accessories
Convenient, quick-detach mount clamps solidly to almost any Picatinny or Weaver-style rail for mounting weaponlights, vertical grips, lasers, optics, and other accessories that need to be removed and reinstalled quickly. Increases the flexibility of your weapon and allows quick changes of accessory configuration to meet individual mission requirements. Lever-lock system will not work loose under recoil; the more force acting on the lever, the tighter it locks, yet when you depress the release tab, the lever swings open easily. Adjust gripping force with a flat head screwdriver or coin for an ultra-secure fit even on non-mil-spec, over- or under-sized rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Locking bar on the side of the mount engages maximum rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement with rail slots.
AR-15, Issue:10, Page:085
Big Book Catalog, Issue:71, Page:092
Big Book Catalog, Issue:71, Page:094
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 2¼” (5.7cm) long. Provides .615” (1.6cm) standoff from weapon rail.
M-Lok Offset Light Mount Magpul.
The M-LOK Offset Light Mount, Polymer provides the user with an ambidextrous platform to mount weapons lights at both the 11 and 1 o’clock positions on M-LOK compatible hand guards and forends. This mounting solution is constructed of polymer and has beveled ends and corners to prevent snagging. The Offset Light Mount allows for the direct attachment of the Surfire M300/600 Series Scout Light or other MIL-STD-1913 Picatinny mounts. The optional Magpul Light Mount V-Block and Rings can also be used to attach hand held lights with a diameter from .75” to 1.03”.
Ar-15/m16 45-Degree Angle Mount Brownells.
Offset Mount For Positioning Tactical Accessories Right Where You Need Them
For situations where the standard 3, 6, 9, and 12 o’clock positions don’t work, we developed this offset angle mount for positioning weapon lights, lasers, and other tactical accessories exactly where you need them. Won’t interfere with the view through the primary optic or backup iron sights, and allows mounting of a holographic red dot sight next to your scope for quick transitions to engage close-range targets. Simply cant the rifle slightly to the side to use the red dot. Lets you position a tactical flashlight for easy thumb activation of a tailcap switch without interfering with the optic. Fully machined from strong yet lightweight 6061 T6 aluminum billet, then hardcoat anodized for added strength, with a durable, non-reflective matte black finish that matches most AR-15 receiver finishes. A tunnel through the mount minimizes obstruction of your forward view, and additional circular cuts in the mount body further reduce weight without sacrificing strength. Ultra-secure clamping system fits any MIL-STD 1913 Picatinny rail, and is easy to install, remove, or reposition in the field or at the range. Full-length locking bar, hardened 4140 steel crossbolt, and an oversized, hex-head lock nut ensure a rock-solid installation even with the hex nut only finger tight. Deep-cut slot accepts a flat-head screwdriver, or even a U.S. quarter, for additional tightening torque.
AR-15, Issue:11, Page:089
Big Book Catalog, Issue:71, Page:093
SPECS: Body - 6061 T6 aluminum, hardcoat anodized, matte black. Crossbolt/Nut - 4041 carbon steel, black oxide finish. 1.875" (4.8cm) long, 1.25" (3.2cm) wide, .900" (2.3cm) high. 1.7 oz. (46g) weight.
12 Gauge Barrel Accessory Mount Rs Regulate.
The BM-12G is an accessory mount that is intended for traditional tube-fed shotguns. It carries a 4 cross slot 1913 Picatinny rail, clamp arms that self adjust and a 100% made in the USA construction. The body is 6061-T6 mil-spec hard anodized and all hardware is SS.
SPECS: Suitable For: Tube Magazine 12 Gauge Shotguns (0.98" in diameter with allowable variance); Length 1.57"; Width 1.19"; Height 1.70"; Max Height above barrel 0.310" (nominal); Weight 1.15 oz; Material AL 6061-T6 with SS hardware.
Remington 870 Saddle Rail Mesa Tactical Products, Inc..
Easy-Install Mount For Scopes, Red Dots & Other Tactical Sights
One-piece saddle mount has integral MIL-STD 1913 Picatinny rail that lets you attach a scope, red dot reflex sight, or other tactical sighting device to your Remington 870 shotgun. Low profile 8¼" rail also offers plenty of room to mount a night vision device or long eye relief scope. Four, steel, Allen head cross-bolts replace the factory trigger pins to create a rock solid grip between the saddle mount and receiver. Precision machined aluminum with cutouts that reduce weight without sacrificing strength.
Big Book Catalog, Issue:71, Page:255
SPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte black. 10¼" (26cm) OAL, 8¼" (21cm) long rail. 4.6 oz. (130g) weight. Includes mounting cross-bolts.